{"product_id":"dependable-condition-true-t-19-27-one-section-solid-door-reach-in-refrigerator-19-cu-ft-115v-r134a-fully-tested-operational","title":"Dependable Condition – True T-19 – 27″ One-Section Solid Door Reach-In Refrigerator – 19 Cu. Ft., 115V, R134a – Fully Tested \u0026 Operational!","description":"\u003ch3\u003eCondition\u003c\/h3\u003e\n\u003ch4\u003eUsed – Dependable Condition – Fully Tested \u0026amp; Operational\u003c\/h4\u003e\n\u003cp\u003eThis True commercial reach-in refrigerator has been professionally inspected and tested to confirm proper cooling and basic operation before listing.\u003c\/p\u003e\n\u003cp\u003eThe cabinet shows noticeable cosmetic wear consistent with previous commercial kitchen use, transportation, and warehouse storage.\u003c\/p\u003e\n\u003cp\u003eVisible cosmetic conditions include:\u003c\/p\u003e\n\u003cp\u003eSurface scratches\u003c\/p\u003e\n\u003cp\u003eScuff marks\u003c\/p\u003e\n\u003cp\u003eStains and discoloration\u003c\/p\u003e\n\u003cp\u003eAdhesive and sticker residue\u003c\/p\u003e\n\u003cp\u003eMarks across the stainless steel door\u003c\/p\u003e\n\u003cp\u003eWear around the handle and lower cabinet\u003c\/p\u003e\n\u003cp\u003eGeneral oxidation and warehouse dust on exposed components\u003c\/p\u003e\n\u003cp\u003eThe following components are visible in the supplied photographs:\u003c\/p\u003e\n\u003cp\u003eOne full-height solid stainless steel door\u003c\/p\u003e\n\u003cp\u003eOne black vertical pull handle\u003c\/p\u003e\n\u003cp\u003eStainless steel front cabinet\u003c\/p\u003e\n\u003cp\u003eAluminum-finished side panel\u003c\/p\u003e\n\u003cp\u003eUpper True identification badge\u003c\/p\u003e\n\u003cp\u003eUpper control and temperature-display area\u003c\/p\u003e\n\u003cp\u003eLower-mounted refrigeration compartment\u003c\/p\u003e\n\u003cp\u003eLower front ventilation assembly\u003c\/p\u003e\n\u003cp\u003eFour swivel casters\u003c\/p\u003e\n\u003cp\u003eManufacturer data plate\u003c\/p\u003e\n\u003cp\u003eChef’s Toys inventory sticker\u003c\/p\u003e\n\u003cp\u003eThe exterior door remains installed and appears structurally intact. The door gasket, self-closing mechanism, lock, temperature display, interior light, shelves, shelf clips, evaporator cover, drain system, complete power cord, and rear refrigeration components are not fully shown and should be inspected during final pickup verification.\u003c\/p\u003e\n\u003cp\u003eThe interior is not shown in the supplied photographs. Interior shelving must not be assumed included unless physically confirmed.\u003c\/p\u003e\n\u003cp\u003ePlease review all supplied photographs for the exact cosmetic condition.\u003c\/p\u003e\n\u003ch3\u003eExact Model Identification\u003c\/h3\u003e\n\u003cp\u003eThe physical True manufacturer data plate confirms:\u003c\/p\u003e\n\u003cp\u003eBrand: True Refrigeration\u003c\/p\u003e\n\u003cp\u003eManufacturer: True Manufacturing Co., Inc.\u003c\/p\u003e\n\u003cp\u003eExact Model: T-19\u003c\/p\u003e\n\u003cp\u003eProduct Type: Commercial One-Section Reach-In Refrigerator\u003c\/p\u003e\n\u003cp\u003eDoor Configuration: One Full-Height Solid Door\u003c\/p\u003e\n\u003cp\u003eCabinet Serial Number: 7310292\u003c\/p\u003e\n\u003cp\u003eRefrigeration Unit: AEA4440YXA\u003c\/p\u003e\n\u003cp\u003eVoltage: 115V\u003c\/p\u003e\n\u003cp\u003eFrequency: 60Hz\u003c\/p\u003e\n\u003cp\u003ePhase: Single Phase\u003c\/p\u003e\n\u003cp\u003eFull-Load Amperage: 8.9A\u003c\/p\u003e\n\u003cp\u003eHorsepower: 1\/3 HP\u003c\/p\u003e\n\u003cp\u003eRefrigerant: R134a\u003c\/p\u003e\n\u003cp\u003eRefrigerant Charge: 10 oz \/ 283 g\u003c\/p\u003e\n\u003cp\u003eHigh-Side Design Pressure: 312 PSIG\u003c\/p\u003e\n\u003cp\u003eLow-Side Design Pressure: 140 PSIG\u003c\/p\u003e\n\u003cp\u003eCountry of Manufacture: USA\u003c\/p\u003e\n\u003cp\u003eNSF Classification: Listed Under NSF Standard No. 7\u003c\/p\u003e\n\u003cp\u003eUL Markings: Present\u003c\/p\u003e\n\u003cp\u003eManufacturing Date: Not Confirmed\u003c\/p\u003e\n\u003cp\u003eThe serial number may be entered into the official True serial-number lookup: https:\/\/www.truemfg.com\/support\/serial-number-lookup\/ when manufacturing records, exact replacement parts, wiring diagrams, or serial-specific service documents are required.\u003c\/p\u003e\n\u003ch3\u003eImportant Model-Version Clarification\u003c\/h3\u003e\n\u003cp\u003eThis unit is the older True T-19 with R134a refrigerant and an 8.9-amp data-plate rating.\u003c\/p\u003e\n\u003cp\u003eIt is not the currently manufactured T-19-HC hydrocarbon model.\u003c\/p\u003e\n\u003cp\u003eThe current T-19-HC uses R290 refrigerant and has substantially different electrical and refrigeration specifications. Those current-model figures must not be substituted for the photographed unit. The physical data plate on this refrigerator is the controlling specification.\u003c\/p\u003e\n\u003cp\u003eLegacy True literature identifies the T-19 configuration as a 27-inch-wide, one-door refrigerator with three standard shelves, a 1\/3-horsepower refrigeration system, 8.9-amp operation, and R134a refrigerant. Legacy True refrigeration catalog: https:\/\/greenleafpacific.com\/image\/catalogues\/true_refrigeration_equip_catalog_2015.pdf\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe True T-19 is a narrow, commercial-grade reach-in refrigerator designed for cold storage in restaurants, cafés, bakeries, bars, hotels, catering kitchens, institutional foodservice operations, convenience stores, and other professional facilities.\u003c\/p\u003e\n\u003cp\u003eIts approximately 27-inch-wide cabinet provides upright refrigerated storage while occupying less floor width than larger two- and three-section reach-in refrigerators.\u003c\/p\u003e\n\u003cp\u003eThe full-height solid door helps reduce light exposure and heat infiltration compared with transparent merchandising doors. The bottom-mounted refrigeration system raises the usable lower shelf area and allows the refrigeration compartment to be accessed from the lower portion of the cabinet.\u003c\/p\u003e\n\u003cp\u003eThe cabinet was manufactured with a stainless steel front, aluminum-finished exterior panels, an aluminum interior liner, a stainless steel interior floor, polyurethane insulation, adjustable shelving, a self-closing door system, an exterior temperature display, and commercial swivel casters.\u003c\/p\u003e\n\u003cp\u003eLegacy True T-Series literature publishes a factory operating range of approximately 33°F to 38°F for properly installed and maintained refrigerators. It also describes the system as an oversized, factory-balanced R134a refrigeration system. Legacy True refrigeration catalog: https:\/\/greenleafpacific.com\/image\/catalogues\/true_refrigeration_equip_catalog_2015.pdf\u003c\/p\u003e\n\u003ch3\u003eTemperature Performance\u003c\/h3\u003e\n\u003cp\u003eManufacturer-Published Operating Range: Approximately 33°F to 38°F\u003c\/p\u003e\n\u003cp\u003eTemperature Application: Commercial Refrigerated Food Storage\u003c\/p\u003e\n\u003cp\u003eFreezer Operation: No\u003c\/p\u003e\n\u003cp\u003eTemperature Control: Commercial Cabinet Thermostat – Exact Installed Control Must Be Verified\u003c\/p\u003e\n\u003cp\u003eExterior Temperature Display: Standard Legacy T-Series Feature – Test Physical Display\u003c\/p\u003e\n\u003cp\u003eActual cabinet temperature depends on:\u003c\/p\u003e\n\u003cp\u003eAmbient kitchen temperature\u003c\/p\u003e\n\u003cp\u003eCondenser cleanliness\u003c\/p\u003e\n\u003cp\u003eDoor-opening frequency\u003c\/p\u003e\n\u003cp\u003eDoor-gasket condition\u003c\/p\u003e\n\u003cp\u003eThermostat calibration\u003c\/p\u003e\n\u003cp\u003eFood-loading temperature\u003c\/p\u003e\n\u003cp\u003eProduct arrangement\u003c\/p\u003e\n\u003cp\u003eInterior airflow\u003c\/p\u003e\n\u003cp\u003eEvaporator-fan performance\u003c\/p\u003e\n\u003cp\u003eCondenser-fan performance\u003c\/p\u003e\n\u003cp\u003eCompressor condition\u003c\/p\u003e\n\u003cp\u003eRefrigerant charge\u003c\/p\u003e\n\u003cp\u003eElectrical voltage\u003c\/p\u003e\n\u003cp\u003eRear ventilation\u003c\/p\u003e\n\u003cp\u003eCabinet leveling\u003c\/p\u003e\n\u003cp\u003eThe refrigerator should be operated empty and monitored with a calibrated commercial thermometer before food is loaded.\u003c\/p\u003e\n\u003cp\u003eFood must not block the evaporator housing or rear air-distribution path.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer’s legacy manual advises maintaining approximately four inches of clearance between stored product and the evaporator housing to support proper airflow.\u003c\/p\u003e\n\u003ch3\u003eRefrigeration System\u003c\/h3\u003e\n\u003cp\u003eSelf-contained commercial refrigeration system\u003c\/p\u003e\n\u003cp\u003eBottom-mounted condensing unit\u003c\/p\u003e\n\u003cp\u003e1\/3-horsepower data-plate rating\u003c\/p\u003e\n\u003cp\u003eForced-air cabinet circulation\u003c\/p\u003e\n\u003cp\u003eR134a refrigerant\u003c\/p\u003e\n\u003cp\u003e10-ounce \/ 283-gram refrigerant charge\u003c\/p\u003e\n\u003cp\u003eCommercial hermetic compressor\u003c\/p\u003e\n\u003cp\u003eCondenser coil\u003c\/p\u003e\n\u003cp\u003eCondenser fan\u003c\/p\u003e\n\u003cp\u003eEvaporator coil\u003c\/p\u003e\n\u003cp\u003eEvaporator fan\u003c\/p\u003e\n\u003cp\u003eCapillary-tube refrigerant-control system associated with this model family\u003c\/p\u003e\n\u003cp\u003eThermostatic cabinet-temperature control\u003c\/p\u003e\n\u003cp\u003eCondensate-management components\u003c\/p\u003e\n\u003cp\u003eFilter drier\u003c\/p\u003e\n\u003cp\u003eCompressor starting components\u003c\/p\u003e\n\u003cp\u003eCompressor overload protection\u003c\/p\u003e\n\u003cp\u003eLower front service access\u003c\/p\u003e\n\u003cp\u003eThe bottom-mounted refrigeration arrangement allows the compressor to operate closer to the cooler, lower section of the kitchen and provides easier service access than many top-mounted systems.\u003c\/p\u003e\n\u003cp\u003eThe physical condition of the compressor, fan motors, condenser coil, evaporator, drain pan, refrigerant tubing, wiring, and starting components should be inspected before final commercial installation.\u003c\/p\u003e\n\u003ch3\u003eR134a Refrigerant\u003c\/h3\u003e\n\u003cp\u003eRefrigerant Type: R134a\u003c\/p\u003e\n\u003cp\u003eFactory Data-Plate Charge: 10 oz \/ 283 g\u003c\/p\u003e\n\u003cp\u003eHigh-Side Design Pressure: 312 PSIG\u003c\/p\u003e\n\u003cp\u003eLow-Side Design Pressure: 140 PSIG\u003c\/p\u003e\n\u003cp\u003eThis refrigerator does not use the R290 refrigerant found in the current T-19-HC model.\u003c\/p\u003e\n\u003cp\u003eThe sealed refrigeration system should be serviced only by qualified commercial-refrigeration technicians using approved recovery, evacuation, leak-testing, charging, and repair procedures.\u003c\/p\u003e\n\u003cp\u003eRefrigerant must not be released intentionally.\u003c\/p\u003e\n\u003cp\u003eDo not drill, cut, crush, bend, heat, or puncture the refrigerant tubing.\u003c\/p\u003e\n\u003cp\u003eAny replacement compressor, refrigerant, lubricant, filter drier, fan motor, thermostat, or electrical component must be selected according to the physical model and serial number.\u003c\/p\u003e\n\u003ch3\u003eElectrical Specifications\u003c\/h3\u003e\n\u003cp\u003ePower Type: Electric\u003c\/p\u003e\n\u003cp\u003eVoltage: 115V\u003c\/p\u003e\n\u003cp\u003ePhase: Single Phase\u003c\/p\u003e\n\u003cp\u003eFrequency: 60Hz\u003c\/p\u003e\n\u003cp\u003eFull-Load Amperage: 8.9A\u003c\/p\u003e\n\u003cp\u003eRefrigeration Horsepower: 1\/3 HP\u003c\/p\u003e\n\u003cp\u003eElectrical Connection: Factory Power Cord – Complete Cord and Plug Not Shown\u003c\/p\u003e\n\u003cp\u003eRecommended Circuit: Dedicated Grounded 115V Circuit\u003c\/p\u003e\n\u003cp\u003eCommon Factory Plug Configuration: NEMA 5-15P – Verify Physical Plug Before Installation\u003c\/p\u003e\n\u003cp\u003eExtension Cord: Not Permitted\u003c\/p\u003e\n\u003cp\u003eThe refrigerator must be connected directly to a correctly grounded receptacle supplying the voltage shown on the physical data plate.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer requires a dedicated circuit and warns against removing the grounding pin or operating the refrigerator through an extension cord. True T-Series installation manual: https:\/\/s1.img-b.com\/build.com\/mediabase\/specifications\/true\/1304120\/true-t-12-use-and-care.pdf\u003c\/p\u003e\n\u003cp\u003eBefore installation, inspect the complete cord and plug for:\u003c\/p\u003e\n\u003cp\u003eCuts\u003c\/p\u003e\n\u003cp\u003eCracks\u003c\/p\u003e\n\u003cp\u003eAbrasion\u003c\/p\u003e\n\u003cp\u003eHeat damage\u003c\/p\u003e\n\u003cp\u003eMissing grounding pin\u003c\/p\u003e\n\u003cp\u003eLoose terminals\u003c\/p\u003e\n\u003cp\u003eCrushed insulation\u003c\/p\u003e\n\u003cp\u003eExposed conductors\u003c\/p\u003e\n\u003cp\u003eUnauthorized splices\u003c\/p\u003e\n\u003cp\u003eAfter disconnecting or switching off the refrigerator, wait at least five minutes before restarting it.\u003c\/p\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003eLegacy True literature publishes the following T-19 cabinet dimensions:\u003c\/p\u003e\n\u003cp\u003eWidth: 27 in\u003c\/p\u003e\n\u003cp\u003eDepth: 24.5 in\u003c\/p\u003e\n\u003cp\u003eCabinet Height Without Casters: 75.25 in\u003c\/p\u003e\n\u003cp\u003eStandard Caster Height: Approximately 3.25 in\u003c\/p\u003e\n\u003cp\u003eApproximate Overall Height With Standard Casters: 78.5 in\u003c\/p\u003e\n\u003cp\u003eMetric dimensions published in the legacy catalog:\u003c\/p\u003e\n\u003cp\u003eWidth: 686 mm\u003c\/p\u003e\n\u003cp\u003eDepth: 623 mm\u003c\/p\u003e\n\u003cp\u003eCabinet Height: 1,912 mm\u003c\/p\u003e\n\u003cp\u003eThe listed height excludes the casters.\u003c\/p\u003e\n\u003cp\u003eThe physical refrigerator should be measured before:\u003c\/p\u003e\n\u003cp\u003ePassing through doorways\u003c\/p\u003e\n\u003cp\u003ePlacing beneath overhead obstructions\u003c\/p\u003e\n\u003cp\u003eInstalling inside an existing equipment line\u003c\/p\u003e\n\u003cp\u003eOrdering freight service\u003c\/p\u003e\n\u003cp\u003eConstructing wall restraints\u003c\/p\u003e\n\u003cp\u003ePositioning beside fixed counters\u003c\/p\u003e\n\u003cp\u003eInstalling replacement casters or legs\u003c\/p\u003e\n\u003cp\u003eAllow additional clearance for the rear access panel, power cord, electrical plug, airflow, door swing, handle projection, cleaning, and service access.\u003c\/p\u003e\n\u003ch3\u003eCapacity\u003c\/h3\u003e\n\u003cp\u003eNominal Capacity Class: 19 Cu. Ft.\u003c\/p\u003e\n\u003cp\u003eActual usable storage capacity depends on:\u003c\/p\u003e\n\u003cp\u003eNumber of shelves installed\u003c\/p\u003e\n\u003cp\u003eShelf spacing\u003c\/p\u003e\n\u003cp\u003eEvaporator clearance\u003c\/p\u003e\n\u003cp\u003eProduct container dimensions\u003c\/p\u003e\n\u003cp\u003eAir-circulation requirements\u003c\/p\u003e\n\u003cp\u003eFood-pan dimensions\u003c\/p\u003e\n\u003cp\u003eDoor clearance\u003c\/p\u003e\n\u003cp\u003eRequired separation of food products\u003c\/p\u003e\n\u003cp\u003eInterior accessories\u003c\/p\u003e\n\u003cp\u003eThe nominal capacity should not be interpreted as the exact usable volume available for every product arrangement.\u003c\/p\u003e\n\u003ch3\u003ePublished Weight\u003c\/h3\u003e\n\u003cp\u003eLegacy Published Crated Weight: Approximately 109 kg \/ 240 lb\u003c\/p\u003e\n\u003cp\u003eThe actual used-unit weight may vary depending on:\u003c\/p\u003e\n\u003cp\u003eShelves\u003c\/p\u003e\n\u003cp\u003eShelf clips\u003c\/p\u003e\n\u003cp\u003eCasters\u003c\/p\u003e\n\u003cp\u003eReplacement components\u003c\/p\u003e\n\u003cp\u003eCompressor revision\u003c\/p\u003e\n\u003cp\u003eDoor hardware\u003c\/p\u003e\n\u003cp\u003ePackaging\u003c\/p\u003e\n\u003cp\u003ePallet\u003c\/p\u003e\n\u003cp\u003eProtective wrap\u003c\/p\u003e\n\u003cp\u003eDo not move the refrigerator by pulling on the door, handle, power cord, refrigeration tubing, temperature display, or lower grille.\u003c\/p\u003e\n\u003cp\u003eUse a properly rated appliance dolly, pallet jack, lift gate, or forklift.\u003c\/p\u003e\n\u003ch3\u003eCabinet Construction\u003c\/h3\u003e\n\u003cp\u003eStainless steel front\u003c\/p\u003e\n\u003cp\u003eStainless steel solid door exterior\u003c\/p\u003e\n\u003cp\u003eAnodized aluminum-finished exterior side panels\u003c\/p\u003e\n\u003cp\u003eAluminum-finished exterior top and rear components\u003c\/p\u003e\n\u003cp\u003eClear-coated aluminum interior liner in the standard legacy configuration\u003c\/p\u003e\n\u003cp\u003eStainless steel interior floor\u003c\/p\u003e\n\u003cp\u003eFoamed-in-place polyurethane insulation\u003c\/p\u003e\n\u003cp\u003eHeavy-duty steel lower frame\u003c\/p\u003e\n\u003cp\u003eBottom-mounted refrigeration system\u003c\/p\u003e\n\u003cp\u003eLower front service access\u003c\/p\u003e\n\u003cp\u003eFull-height insulated door\u003c\/p\u003e\n\u003cp\u003eCommercial door gasket\u003c\/p\u003e\n\u003cp\u003eAdjustable shelf-pilaster system\u003c\/p\u003e\n\u003cp\u003eCommercial swivel casters\u003c\/p\u003e\n\u003cp\u003eExterior temperature-display area\u003c\/p\u003e\n\u003cp\u003eUpper identification and control panel\u003c\/p\u003e\n\u003cp\u003eThe interior is not shown. Interior liner condition, stainless steel floor condition, evaporator-cover condition, drain components, shelf pilasters, and shelving must be verified physically.\u003c\/p\u003e\n\u003ch3\u003eDoor System\u003c\/h3\u003e\n\u003cp\u003eOne full-height solid insulated door\u003c\/p\u003e\n\u003cp\u003eRight-side hinge orientation as photographed\u003c\/p\u003e\n\u003cp\u003eHandle positioned on the left side\u003c\/p\u003e\n\u003cp\u003eBlack vertical pull handle\u003c\/p\u003e\n\u003cp\u003eCommercial magnetic door gasket\u003c\/p\u003e\n\u003cp\u003ePositive-seal door design\u003c\/p\u003e\n\u003cp\u003eSelf-closing door configuration published for the T-Series\u003c\/p\u003e\n\u003cp\u003eTorsion-style closure system published for the T-Series\u003c\/p\u003e\n\u003cp\u003eDoor-lock system published as standard for the legacy T-Series\u003c\/p\u003e\n\u003cp\u003eThe current operation of the self-closing mechanism and lock has not been visually confirmed from the photographs.\u003c\/p\u003e\n\u003cp\u003eInspect the door for:\u003c\/p\u003e\n\u003cp\u003eSmooth opening and closing\u003c\/p\u003e\n\u003cp\u003eCorrect hinge alignment\u003c\/p\u003e\n\u003cp\u003eAdequate self-closing force\u003c\/p\u003e\n\u003cp\u003eFull gasket contact\u003c\/p\u003e\n\u003cp\u003eGasket cracks or hardened sections\u003c\/p\u003e\n\u003cp\u003eLoose handle hardware\u003c\/p\u003e\n\u003cp\u003eDoor sagging\u003c\/p\u003e\n\u003cp\u003eHinge wear\u003c\/p\u003e\n\u003cp\u003eLock operation\u003c\/p\u003e\n\u003cp\u003eAir leakage\u003c\/p\u003e\n\u003cp\u003eCondensation around the frame\u003c\/p\u003e\n\u003cp\u003eReplacement handle modifications\u003c\/p\u003e\n\u003cp\u003eThe visible black handle should be treated as the installed handle on this particular unit. Its originality should not be assumed without serial-specific confirmation.\u003c\/p\u003e\n\u003ch3\u003eShelving\u003c\/h3\u003e\n\u003cp\u003eLegacy Factory Configuration: Three Adjustable Heavy-Duty PVC-Coated Wire Shelves\u003c\/p\u003e\n\u003cp\u003eShelves Visible in Supplied Photographs: None – Interior Not Shown\u003c\/p\u003e\n\u003cp\u003eShelves Guaranteed Included: No, Unless Physically Confirmed at Pickup\u003c\/p\u003e\n\u003cp\u003eThe original model series was typically supplied with three adjustable shelves and four shelf clips per shelf.\u003c\/p\u003e\n\u003cp\u003eBecause no interior photograph was supplied, do not assume that the following are included:\u003c\/p\u003e\n\u003cp\u003eThree shelves\u003c\/p\u003e\n\u003cp\u003eShelf clips\u003c\/p\u003e\n\u003cp\u003eShelf pilasters\u003c\/p\u003e\n\u003cp\u003eShelf supports\u003c\/p\u003e\n\u003cp\u003eReplacement shelving\u003c\/p\u003e\n\u003cp\u003eTray slides\u003c\/p\u003e\n\u003cp\u003eFood-pan racks\u003c\/p\u003e\n\u003cp\u003eShelf dividers\u003c\/p\u003e\n\u003cp\u003eShelf liners\u003c\/p\u003e\n\u003cp\u003eInspect all shelves for:\u003c\/p\u003e\n\u003cp\u003eBent wires\u003c\/p\u003e\n\u003cp\u003eBroken welds\u003c\/p\u003e\n\u003cp\u003eDamaged coating\u003c\/p\u003e\n\u003cp\u003eRust\u003c\/p\u003e\n\u003cp\u003eMissing clips\u003c\/p\u003e\n\u003cp\u003eUneven positioning\u003c\/p\u003e\n\u003cp\u003eExcessive loading damage\u003c\/p\u003e\n\u003cp\u003eShelves must be level, correctly supported, and arranged to preserve cabinet airflow.\u003c\/p\u003e\n\u003ch3\u003eInterior Lighting\u003c\/h3\u003e\n\u003cp\u003eLegacy T-Series solid-door models were commonly equipped with incandescent interior lighting.\u003c\/p\u003e\n\u003cp\u003eThe following have not been confirmed from the photographs:\u003c\/p\u003e\n\u003cp\u003eInterior lamp\u003c\/p\u003e\n\u003cp\u003eLamp socket\u003c\/p\u003e\n\u003cp\u003eLamp shield\u003c\/p\u003e\n\u003cp\u003eDoor-activated light switch\u003c\/p\u003e\n\u003cp\u003eManual light switch\u003c\/p\u003e\n\u003cp\u003eComplete lighting wiring\u003c\/p\u003e\n\u003cp\u003eLighting operation\u003c\/p\u003e\n\u003cp\u003eDisconnect electrical power before replacing any bulb, lamp socket, switch, or wiring component.\u003c\/p\u003e\n\u003ch3\u003eCasters\u003c\/h3\u003e\n\u003cp\u003eFour swivel casters are visible.\u003c\/p\u003e\n\u003cp\u003eLegacy True literature identifies approximately 2.5-inch-diameter swivel casters with an approximate installed height of 3.25 inches as standard equipment for the T-19.\u003c\/p\u003e\n\u003cp\u003eInspect every caster for:\u003c\/p\u003e\n\u003cp\u003eSecure attachment\u003c\/p\u003e\n\u003cp\u003eBent stems\u003c\/p\u003e\n\u003cp\u003eWheel damage\u003c\/p\u003e\n\u003cp\u003eFlat spots\u003c\/p\u003e\n\u003cp\u003eGrease buildup\u003c\/p\u003e\n\u003cp\u003eBearing wear\u003c\/p\u003e\n\u003cp\u003eBrake operation\u003c\/p\u003e\n\u003cp\u003eCabinet stability\u003c\/p\u003e\n\u003cp\u003eAll casters must remain firmly seated against the lower frame.\u003c\/p\u003e\n\u003cp\u003eThe refrigerator must be leveled front to back and side to side. A poorly leveled cabinet can affect door operation and condensate drainage.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eExact legacy True T-19 model\u003c\/p\u003e\n\u003cp\u003eOne-section upright refrigerator\u003c\/p\u003e\n\u003cp\u003eOne full-height solid door\u003c\/p\u003e\n\u003cp\u003eApproximately 27-inch cabinet width\u003c\/p\u003e\n\u003cp\u003eNominal 19-cubic-foot capacity class\u003c\/p\u003e\n\u003cp\u003eStainless steel front\u003c\/p\u003e\n\u003cp\u003eStainless steel door exterior\u003c\/p\u003e\n\u003cp\u003eAluminum-finished side panels\u003c\/p\u003e\n\u003cp\u003eBottom-mounted refrigeration system\u003c\/p\u003e\n\u003cp\u003e1\/3-horsepower data-plate rating\u003c\/p\u003e\n\u003cp\u003e115V electrical operation\u003c\/p\u003e\n\u003cp\u003eSingle-phase configuration\u003c\/p\u003e\n\u003cp\u003e8.9-amp full-load rating\u003c\/p\u003e\n\u003cp\u003e60Hz operation\u003c\/p\u003e\n\u003cp\u003eR134a refrigerant\u003c\/p\u003e\n\u003cp\u003e10-ounce refrigerant charge\u003c\/p\u003e\n\u003cp\u003eApproximately 33–38°F published holding range\u003c\/p\u003e\n\u003cp\u003eForced-air refrigeration\u003c\/p\u003e\n\u003cp\u003eExterior temperature-display area\u003c\/p\u003e\n\u003cp\u003eAdjustable thermostat\u003c\/p\u003e\n\u003cp\u003eSelf-closing door design\u003c\/p\u003e\n\u003cp\u003eMagnetic door gasket\u003c\/p\u003e\n\u003cp\u003eDoor-lock configuration associated with the model family\u003c\/p\u003e\n\u003cp\u003eThree shelves in the standard legacy factory configuration\u003c\/p\u003e\n\u003cp\u003eCommercial swivel casters\u003c\/p\u003e\n\u003cp\u003eNSF Standard No. 7 marking\u003c\/p\u003e\n\u003cp\u003eUL markings\u003c\/p\u003e\n\u003cp\u003eMade in USA\u003c\/p\u003e\n\u003cp\u003eNarrow commercial footprint\u003c\/p\u003e\n\u003cp\u003eSuitable for refrigerated commercial-food storage\u003c\/p\u003e\n\u003ch3\u003eCertifications and Markings\u003c\/h3\u003e\n\u003cp\u003eThe physical data plate displays:\u003c\/p\u003e\n\u003cp\u003eNSF mark\u003c\/p\u003e\n\u003cp\u003eUL-related listing marks\u003c\/p\u003e\n\u003cp\u003eCommercial refrigeration listing information\u003c\/p\u003e\n\u003cp\u003e“Listed Under NSF No. 7”\u003c\/p\u003e\n\u003cp\u003eMade in USA identification\u003c\/p\u003e\n\u003cp\u003eFinal installation and use remain subject to applicable:\u003c\/p\u003e\n\u003cp\u003eHealth-department regulations\u003c\/p\u003e\n\u003cp\u003eElectrical codes\u003c\/p\u003e\n\u003cp\u003eFire codes\u003c\/p\u003e\n\u003cp\u003eBuilding codes\u003c\/p\u003e\n\u003cp\u003eFood-storage regulations\u003c\/p\u003e\n\u003cp\u003eRefrigeration-service requirements\u003c\/p\u003e\n\u003cp\u003eLocal authority approval\u003c\/p\u003e\n\u003ch3\u003eSuitable Applications\u003c\/h3\u003e\n\u003cp\u003eRestaurants\u003c\/p\u003e\n\u003cp\u003eCommercial kitchens\u003c\/p\u003e\n\u003cp\u003eCafés\u003c\/p\u003e\n\u003cp\u003eCoffee shops\u003c\/p\u003e\n\u003cp\u003eBakeries\u003c\/p\u003e\n\u003cp\u003ePizzerias\u003c\/p\u003e\n\u003cp\u003eSandwich shops\u003c\/p\u003e\n\u003cp\u003eDelicatessens\u003c\/p\u003e\n\u003cp\u003eBars\u003c\/p\u003e\n\u003cp\u003eHotel kitchens\u003c\/p\u003e\n\u003cp\u003eCatering kitchens\u003c\/p\u003e\n\u003cp\u003eBanquet facilities\u003c\/p\u003e\n\u003cp\u003eFood trucks with suitable space and electrical service\u003c\/p\u003e\n\u003cp\u003eConcession operations\u003c\/p\u003e\n\u003cp\u003eSchool kitchens\u003c\/p\u003e\n\u003cp\u003eUniversity kitchens\u003c\/p\u003e\n\u003cp\u003eHospital foodservice departments\u003c\/p\u003e\n\u003cp\u003eSenior-living kitchens\u003c\/p\u003e\n\u003cp\u003eCorporate cafeterias\u003c\/p\u003e\n\u003cp\u003eChurch kitchens\u003c\/p\u003e\n\u003cp\u003eCommunity centers\u003c\/p\u003e\n\u003cp\u003eConvenience stores\u003c\/p\u003e\n\u003cp\u003eSmall grocery stores\u003c\/p\u003e\n\u003cp\u003eFood-preparation facilities\u003c\/p\u003e\n\u003cp\u003eCommissary kitchens\u003c\/p\u003e\n\u003cp\u003eEvent venues\u003c\/p\u003e\n\u003cp\u003eInstitutional kitchens\u003c\/p\u003e\n\u003cp\u003eFinal suitability depends on required food temperature, ambient conditions, electrical service, local health codes, interior condition, shelving, and the results of a final temperature test.\u003c\/p\u003e\n\u003ch3\u003eNot Suitable For\u003c\/h3\u003e\n\u003cp\u003eFrozen-food storage\u003c\/p\u003e\n\u003cp\u003eIce-cream storage\u003c\/p\u003e\n\u003cp\u003eOutdoor installation\u003c\/p\u003e\n\u003cp\u003eUnconditioned exterior areas\u003c\/p\u003e\n\u003cp\u003eResidential electrical circuits that cannot support commercial equipment\u003c\/p\u003e\n\u003cp\u003eMedical or vaccine storage without application-specific validation\u003c\/p\u003e\n\u003cp\u003eLaboratory storage\u003c\/p\u003e\n\u003cp\u003eExplosive or flammable materials\u003c\/p\u003e\n\u003cp\u003eCorrosive chemicals\u003c\/p\u003e\n\u003cp\u003eOperation through an extension cord\u003c\/p\u003e\n\u003cp\u003eOperation without proper grounding\u003c\/p\u003e\n\u003cp\u003eUse as a blast chiller\u003c\/p\u003e\n\u003cp\u003eRapid cooling of large quantities of hot food\u003c\/p\u003e\n\u003ch3\u003eManufacturing Information\u003c\/h3\u003e\n\u003cp\u003eBrand: True\u003c\/p\u003e\n\u003cp\u003eManufacturer: True Manufacturing Co., Inc.\u003c\/p\u003e\n\u003cp\u003eModel: T-19\u003c\/p\u003e\n\u003cp\u003eCabinet Serial Number: 7310292\u003c\/p\u003e\n\u003cp\u003eRefrigeration Unit Identification: AEA4440YXA\u003c\/p\u003e\n\u003cp\u003eManufacturing Location: O’Fallon, Missouri, USA\u003c\/p\u003e\n\u003cp\u003eCountry of Manufacture: USA\u003c\/p\u003e\n\u003cp\u003eExact Manufacturing Date: Not Confirmed\u003c\/p\u003e\n\u003cp\u003eThe manufacturing date should not be estimated from the serial number without confirmation through True Manufacturing’s serial-number database or technical-support department.\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cp\u003eOne True T-19 commercial reach-in refrigerator\u003c\/p\u003e\n\u003cp\u003eOne one-section upright cabinet\u003c\/p\u003e\n\u003cp\u003eOne full-height solid stainless steel door\u003c\/p\u003e\n\u003cp\u003eOne black vertical pull handle\u003c\/p\u003e\n\u003cp\u003eInstalled hinges\u003c\/p\u003e\n\u003cp\u003eInstalled door gasket remaining with the unit\u003c\/p\u003e\n\u003cp\u003eInstalled upper identification and control area\u003c\/p\u003e\n\u003cp\u003eInstalled exterior temperature-display components remaining with the unit\u003c\/p\u003e\n\u003cp\u003eInstalled bottom-mounted refrigeration system\u003c\/p\u003e\n\u003cp\u003eInstalled R134a refrigeration components\u003c\/p\u003e\n\u003cp\u003eInstalled compressor\u003c\/p\u003e\n\u003cp\u003eInstalled condenser\u003c\/p\u003e\n\u003cp\u003eInstalled condenser fan\u003c\/p\u003e\n\u003cp\u003eInstalled evaporator\u003c\/p\u003e\n\u003cp\u003eInstalled evaporator fan\u003c\/p\u003e\n\u003cp\u003eInstalled thermostat components remaining with the unit\u003c\/p\u003e\n\u003cp\u003eInstalled condensate-management components remaining with the unit\u003c\/p\u003e\n\u003cp\u003eInstalled lower front ventilation assembly\u003c\/p\u003e\n\u003cp\u003eFour installed swivel casters\u003c\/p\u003e\n\u003cp\u003eManufacturer data plate\u003c\/p\u003e\n\u003cp\u003eTrue manufacturer badge\u003c\/p\u003e\n\u003cp\u003eChef’s Toys sticker\u003c\/p\u003e\n\u003cp\u003eAll permanently installed components shown in the supplied photographs\u003c\/p\u003e\n\u003cp\u003eUnit sold exactly as pictured\u003c\/p\u003e\n\u003ch3\u003eNot Included\u003c\/h3\u003e\n\u003cp\u003eFood products\u003c\/p\u003e\n\u003cp\u003eBeverages\u003c\/p\u003e\n\u003cp\u003eStorage containers\u003c\/p\u003e\n\u003cp\u003eFood pans\u003c\/p\u003e\n\u003cp\u003eSheet pans\u003c\/p\u003e\n\u003cp\u003eThree factory shelves unless physically confirmed\u003c\/p\u003e\n\u003cp\u003eShelf clips unless physically confirmed\u003c\/p\u003e\n\u003cp\u003eAdditional shelves\u003c\/p\u003e\n\u003cp\u003eTray slides\u003c\/p\u003e\n\u003cp\u003eShelf dividers\u003c\/p\u003e\n\u003cp\u003eShelf liners\u003c\/p\u003e\n\u003cp\u003eReplacement door gasket\u003c\/p\u003e\n\u003cp\u003eReplacement door handle\u003c\/p\u003e\n\u003cp\u003eDoor-lock key\u003c\/p\u003e\n\u003cp\u003eReplacement lock\u003c\/p\u003e\n\u003cp\u003eReplacement temperature display\u003c\/p\u003e\n\u003cp\u003eReplacement thermostat\u003c\/p\u003e\n\u003cp\u003eReplacement interior light\u003c\/p\u003e\n\u003cp\u003eReplacement casters\u003c\/p\u003e\n\u003cp\u003eCaster shims\u003c\/p\u003e\n\u003cp\u003eOptional legs\u003c\/p\u003e\n\u003cp\u003eSeismic legs\u003c\/p\u003e\n\u003cp\u003eWall restraint\u003c\/p\u003e\n\u003cp\u003eFloor anchors\u003c\/p\u003e\n\u003cp\u003eExternal thermometer\u003c\/p\u003e\n\u003cp\u003eTemperature-data logger\u003c\/p\u003e\n\u003cp\u003eRemote-monitoring system\u003c\/p\u003e\n\u003cp\u003eAlarm system\u003c\/p\u003e\n\u003cp\u003eExtension cord\u003c\/p\u003e\n\u003cp\u003ePower strip\u003c\/p\u003e\n\u003cp\u003eElectrical adapter\u003c\/p\u003e\n\u003cp\u003eVoltage transformer\u003c\/p\u003e\n\u003cp\u003eSurge protector\u003c\/p\u003e\n\u003cp\u003eReplacement power cord\u003c\/p\u003e\n\u003cp\u003eReplacement compressor\u003c\/p\u003e\n\u003cp\u003eReplacement fan motors\u003c\/p\u003e\n\u003cp\u003eRefrigerant-service equipment\u003c\/p\u003e\n\u003cp\u003eR134a refrigerant\u003c\/p\u003e\n\u003cp\u003eInstallation labor\u003c\/p\u003e\n\u003cp\u003eElectrical repairs\u003c\/p\u003e\n\u003cp\u003eRefrigeration repairs\u003c\/p\u003e\n\u003cp\u003eCleaning chemicals\u003c\/p\u003e\n\u003cp\u003eFreight pallet\u003c\/p\u003e\n\u003cp\u003eShipping crate\u003c\/p\u003e\n\u003cp\u003eProtective packaging\u003c\/p\u003e\n\u003cp\u003eLift-gate service\u003c\/p\u003e\n\u003cp\u003eManufacturer warranty\u003c\/p\u003e\n\u003cp\u003eAccessories not shown in the supplied photographs\u003c\/p\u003e\n\u003ch3\u003eInstallation Requirements\u003c\/h3\u003e\n\u003cp\u003eInstallation should be completed or supervised by a qualified commercial-refrigeration technician and licensed electrician.\u003c\/p\u003e\n\u003cp\u003eKeep the refrigerator upright during transport.\u003c\/p\u003e\n\u003cp\u003eAvoid excessive tilting.\u003c\/p\u003e\n\u003cp\u003eAfter positioning, allow the refrigerator to remain upright before connecting electrical power if it was tilted during transportation.\u003c\/p\u003e\n\u003cp\u003ePlace the refrigerator on a strong, level floor.\u003c\/p\u003e\n\u003cp\u003eLevel the cabinet front to back.\u003c\/p\u003e\n\u003cp\u003eLevel the cabinet side to side.\u003c\/p\u003e\n\u003cp\u003eInspect and secure all four casters.\u003c\/p\u003e\n\u003cp\u003eLock the front casters when brakes are present.\u003c\/p\u003e\n\u003cp\u003eConfirm that the door closes and seals correctly.\u003c\/p\u003e\n\u003cp\u003eProvide at least approximately one inch of rear clearance according to the legacy refrigerator manual.\u003c\/p\u003e\n\u003cp\u003eProvide additional space where necessary for servicing, condenser airflow, cord routing, and cleaning.\u003c\/p\u003e\n\u003cp\u003eKeep the lower front ventilation area unobstructed.\u003c\/p\u003e\n\u003cp\u003eDo not position the refrigerator beside:\u003c\/p\u003e\n\u003cp\u003eFryers\u003c\/p\u003e\n\u003cp\u003eRanges\u003c\/p\u003e\n\u003cp\u003eOvens\u003c\/p\u003e\n\u003cp\u003eBroilers\u003c\/p\u003e\n\u003cp\u003eGriddles\u003c\/p\u003e\n\u003cp\u003eSteam equipment\u003c\/p\u003e\n\u003cp\u003eDishwashers\u003c\/p\u003e\n\u003cp\u003eRadiators\u003c\/p\u003e\n\u003cp\u003eDirect sunlight\u003c\/p\u003e\n\u003cp\u003eOther high-heat sources\u003c\/p\u003e\n\u003cp\u003eProvide a dedicated grounded 115V circuit.\u003c\/p\u003e\n\u003cp\u003eVerify incoming voltage with a voltmeter.\u003c\/p\u003e\n\u003cp\u003eDo not use an extension cord.\u003c\/p\u003e\n\u003cp\u003eDo not remove the grounding pin.\u003c\/p\u003e\n\u003cp\u003eInspect the power cord and plug before startup.\u003c\/p\u003e\n\u003cp\u003eConfirm the drain hose is properly positioned in the condensate pan.\u003c\/p\u003e\n\u003cp\u003eClean the condenser before placing the refrigerator into commercial service.\u003c\/p\u003e\n\u003cp\u003eClean and sanitize the interior.\u003c\/p\u003e\n\u003cp\u003eVerify the door gasket.\u003c\/p\u003e\n\u003cp\u003eVerify the thermostat and exterior temperature display.\u003c\/p\u003e\n\u003cp\u003eRun the refrigerator empty before loading.\u003c\/p\u003e\n\u003cp\u003eUse a calibrated commercial thermometer to verify stable operation between approximately 33°F and 38°F.\u003c\/p\u003e\n\u003cp\u003eConfirm that the compressor cycles correctly.\u003c\/p\u003e\n\u003cp\u003eConfirm both condenser and evaporator fans operate properly.\u003c\/p\u003e\n\u003cp\u003eConfirm that no abnormal vibration, electrical odor, oil residue, or refrigerant leak is present.\u003c\/p\u003e\n\u003cp\u003eLeave adequate space around the interior evaporator cover.\u003c\/p\u003e\n\u003cp\u003eComply with all applicable electrical, refrigeration, fire, health, sanitation, and building requirements.\u003c\/p\u003e\n\u003ch3\u003eCleaning \u0026amp; Care\u003c\/h3\u003e\n\u003cp\u003eDisconnect electrical power before cleaning or maintenance.\u003c\/p\u003e\n\u003cp\u003eRemove all food products.\u003c\/p\u003e\n\u003cp\u003eRemove shelving if present.\u003c\/p\u003e\n\u003cp\u003eWash shelves with warm water and suitable commercial detergent.\u003c\/p\u003e\n\u003cp\u003eClean the interior liner with a soft cloth or non-abrasive sponge.\u003c\/p\u003e\n\u003cp\u003eClean the stainless steel floor.\u003c\/p\u003e\n\u003cp\u003eClean the door gasket and sealing surfaces.\u003c\/p\u003e\n\u003cp\u003eRemove food debris from interior corners.\u003c\/p\u003e\n\u003cp\u003eDry all interior surfaces.\u003c\/p\u003e\n\u003cp\u003eClean the stainless steel exterior in the direction of the grain.\u003c\/p\u003e\n\u003cp\u003eUse a soft cloth.\u003c\/p\u003e\n\u003cp\u003eUse a non-abrasive commercial stainless steel cleaner.\u003c\/p\u003e\n\u003cp\u003eRemove cleaner residue.\u003c\/p\u003e\n\u003cp\u003eDry the exterior after cleaning.\u003c\/p\u003e\n\u003cp\u003eDo not use steel wool.\u003c\/p\u003e\n\u003cp\u003eDo not use wire brushes on stainless steel.\u003c\/p\u003e\n\u003cp\u003eDo not use metal scrapers.\u003c\/p\u003e\n\u003cp\u003eDo not use abrasive pads.\u003c\/p\u003e\n\u003cp\u003eDo not use hydrochloric or muriatic acid.\u003c\/p\u003e\n\u003cp\u003eAvoid chlorine-based cleaners on stainless steel.\u003c\/p\u003e\n\u003cp\u003eDo not pressure-wash the cabinet.\u003c\/p\u003e\n\u003cp\u003eDo not spray water into the control panel.\u003c\/p\u003e\n\u003cp\u003eDo not spray water into the temperature display.\u003c\/p\u003e\n\u003cp\u003eDo not spray the compressor compartment.\u003c\/p\u003e\n\u003cp\u003eDo not immerse electrical components.\u003c\/p\u003e\n\u003cp\u003eInspect the condenser regularly.\u003c\/p\u003e\n\u003cp\u003eRemove the lower grille carefully.\u003c\/p\u003e\n\u003cp\u003eBrush or vacuum accumulated dirt, grease, lint, and dust from the condenser fins.\u003c\/p\u003e\n\u003cp\u003eDo not bend the condenser fins.\u003c\/p\u003e\n\u003cp\u003eReinstall the protective grille after cleaning.\u003c\/p\u003e\n\u003cp\u003eTrue’s legacy manual recommends scheduled condenser cleaning approximately every 30 days or as operating conditions require. Heavy kitchen grease may require more frequent service. True T-Series installation and maintenance manual: https:\/\/s1.img-b.com\/build.com\/mediabase\/specifications\/true\/1304120\/true-t-12-use-and-care.pdf\u003c\/p\u003e\n\u003cp\u003eUse a qualified technician for:\u003c\/p\u003e\n\u003cp\u003eCompressor repairs\u003c\/p\u003e\n\u003cp\u003eRefrigerant recovery or charging\u003c\/p\u003e\n\u003cp\u003eLeak repairs\u003c\/p\u003e\n\u003cp\u003eThermostat replacement\u003c\/p\u003e\n\u003cp\u003eTemperature-display repairs\u003c\/p\u003e\n\u003cp\u003eFan-motor replacement\u003c\/p\u003e\n\u003cp\u003eStarting-component repairs\u003c\/p\u003e\n\u003cp\u003eElectrical wiring repairs\u003c\/p\u003e\n\u003cp\u003eDoor-hinge repairs\u003c\/p\u003e\n\u003cp\u003eDrain-system repairs\u003c\/p\u003e\n\u003cp\u003eSealed-system service\u003c\/p\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cp\u003eUsed commercial reach-in refrigerator\u003c\/p\u003e\n\u003cp\u003eFully tested and operational before listing\u003c\/p\u003e\n\u003cp\u003eExact model is True T-19\u003c\/p\u003e\n\u003cp\u003eThis is not the current T-19-HC model\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms 115V\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms 60Hz\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms single-phase operation\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms 8.9A\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms 1\/3 HP\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms R134a refrigerant\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms 10-ounce \/ 283-gram charge\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms 312-PSIG high-side design pressure\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms 140-PSIG low-side design pressure\u003c\/p\u003e\n\u003cp\u003ePhysical data plate confirms serial number 7310292\u003c\/p\u003e\n\u003cp\u003ePhysical data plate identifies refrigeration unit AEA4440YXA\u003c\/p\u003e\n\u003cp\u003ePhysical data plate states Made in USA\u003c\/p\u003e\n\u003cp\u003eNSF and UL-related markings are visible\u003c\/p\u003e\n\u003cp\u003eNominal capacity class is 19 cubic feet\u003c\/p\u003e\n\u003cp\u003ePublished legacy temperature range is approximately 33–38°F\u003c\/p\u003e\n\u003cp\u003eOne solid door\u003c\/p\u003e\n\u003cp\u003eRight-hinged configuration as photographed\u003c\/p\u003e\n\u003cp\u003eHandle positioned on the left\u003c\/p\u003e\n\u003cp\u003eBottom-mounted refrigeration system\u003c\/p\u003e\n\u003cp\u003eFour casters visible\u003c\/p\u003e\n\u003cp\u003eInterior not shown\u003c\/p\u003e\n\u003cp\u003eShelves not confirmed\u003c\/p\u003e\n\u003cp\u003eFactory configuration originally published with three shelves\u003c\/p\u003e\n\u003cp\u003eDoor-gasket condition must be inspected\u003c\/p\u003e\n\u003cp\u003eSelf-closing operation must be verified\u003c\/p\u003e\n\u003cp\u003eLock and key availability must be verified\u003c\/p\u003e\n\u003cp\u003eExterior temperature display must be tested\u003c\/p\u003e\n\u003cp\u003eInterior light must be tested\u003c\/p\u003e\n\u003cp\u003eComplete power cord and plug are not shown\u003c\/p\u003e\n\u003cp\u003eManufacturing date not confirmed\u003c\/p\u003e\n\u003cp\u003eVisible scratches, stains, scuffs, discoloration, and sticker residue\u003c\/p\u003e\n\u003cp\u003eNo manufacturer warranty included\u003c\/p\u003e\n\u003cp\u003eSold as-is, where-is\u003c\/p\u003e\n\u003cp\u003eShipping calculated at checkout\u003c\/p\u003e\n\u003cp\u003eFreight or local pickup recommended\u003c\/p\u003e\n\u003cp\u003eLocal pickup available\u003c\/p\u003e","brand":"True Refrigeration","offers":[{"title":"Default Title","offer_id":47747629940914,"sku":"TRU-L-REF-1352","price":1131.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/0326\/6226\/files\/020dd372-63fd-4dcf-8800-16fb9b66d41b.jpg?v=1784769622","url":"https:\/\/oasis-restaurant-equipment.myshopify.com\/products\/dependable-condition-true-t-19-27-one-section-solid-door-reach-in-refrigerator-19-cu-ft-115v-r134a-fully-tested-operational","provider":"Oasis Restaurant Equipment","version":"1.0","type":"link"}